H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 279)

31-25
Displaying the Detailed Information of a Wireless Service
Displaying the detailed information of a clear-type wireless service
Select Wireless Service > Access Service from the navigation tree to enter the service configuration
page, and click the specified clear-type wireless service to see its detailed information, as shown in
Figure 31-24 .
Figure 31-24 Display the detailed information of a clear-type wireless service
Table 31-13 Clear-type wireless service output description
Field Description
Service Template Number Current service template number
SSID Service set identifier
Binding Interface Name of the WLAN-ESS interface bound with the service template
Service Template Type Service template type
Authentication Method
Type of authentication used
A clear-type wireless service can use only Open System authentication.
SSID-hide
Disable: Indicates that SSID advertisement is enabled.
Enable: Indicates that SSID advertisement is disabled, that is, the AP
does not advertise the SSID in the beacon frames.
Bridge Mode
Forwarding mode, which can be:
Local Forwarding: Uses the local forwarding mode.
Remote Forwarding: Uses the remote forwarding mode, that is, uses the
AC to forward data.
Service Template Status
Service template status, which can be:
Enable: Indicates that the wireless service is enabled.
Disable: Indicates that the wireless service is disabled.
Maximum clients per BSS Maximum number of associated clients per BSS