H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 419)

36-23
Figure 36-24 Configuration progress dialog box
After the configuration process is complete, click Close.
# Enable the wireless service.
After the configuration above, the access service list appears. Perform the following configurations,
as shown in Figure 36-25 .
Figure 36-25 Enable the wireless service
Select the check box before wireless service 1.
Click Enable. A configuration progress dialog box appears.
After the configuration process is complete, click Close.
# Bind an AP radio with the wireless service.
On the wireless service list, click the Bind link of wireless service 1 and then perform the following
configurations, as shown in Figure 36-26 .