H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 502)

42-14
Configuring Static Blacklist
On the blacklist configuration page as shown in Figure 42-18 , select the Static tab to enter the static
blacklist configuration page, as shown in Figure 42-19 . Click Add Static to enter the static blacklist
configuration page.
Figure 42-19 Static blacklist configuration
Table 42-9 describes static blacklist configuration items.
Table 42-9 Static blacklist configuration items
Item Description
MAC Address Add a MAC address to the static blacklist.
Select Current Connect
Client If you select the check box, the table below lists the current existing clients. Select
the check boxes of the clients to add their MAC addresses to the static blacklist.
Configuring White List
Select Security > Filter from the navigation tree, and then select the Whitelist tab. Click Add to enter
the white list configuration page, as shown in Figure 42-20 .
Figure 42-20 White list configuration
Table 42-10 describes the white list configuration items.