H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 465)

40-4
Item Description
Level
Select an authorization level for the local user, which
can be Visitor, Monitor, Configure, or Management, in
ascending order of priority.
VLAN
Specify the VLAN to be authorized to the local user
after the user passes authentication.
ACL
Specify the ACL to be used by the access device to
restrict the access of the local user after the user
passes authentication.
User-profile
Specify the user profile for the local user.
For information about user profile configuration, refer to
Configuring a User Profile .
Every authorization attribute
has its definite application
environments and purposes.
Therefore, when configuring
authorization attributes for a
local user, determine what
attributes are needed first.
Password
Confirm
Specify and confirm the password of the local user. The settings of these two fields
must be the same.
Configuring a User Group
Select Authentication > Users from the navigation tree, and then select the User Group tab to display
the existing user groups, as shown in Figure 40-3 . Then, click Add to enter the user group configuration
page, as shown in Figure 40-4 .
Figure 40-3 User group list
Figure 40-4 User group configuration page