H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 229)

27-4
Configuring static name resolution table
Perform the tasks in Table 27-1 to configure static name resolution table.
Table 27-1 Static name resolution table configuration task list
Task Remarks
Configuring Static Name Resolution Table
Required
By default, no host name-to-IP address mappings are
configured in the static domain name resolution table.
Configuring dynamic domain name resolution
Perform the tasks in Table 27-2 to configure dynamic domain name resolution.
Table 27-2 Dynamic domain name resolution configuration task list
Task Remarks
Configuring Dynamic Domain Name Resolution
Required
Enable dynamic domain name resolution.
This function is disabled by default.
Adding a DNS Server Address
Required
Not configured by default.
Adding a Domain Name Suffix
Optional
Not configured by default.
Configuring DNS proxy
Perform the tasks in Table 27-3 to configure DNS proxy.
Table 27-3 DNS proxy configuration task list
Task Remarks
Configuring DNS Proxy
Required
Configure the device as a DNS proxy.
By default, the device is not a DNS proxy.
Adding a DNS Server Address
Required
Not configured by default.
Configuring Static Name Resolution Table
Select Network > DNS from the navigation tree to enter the default static domain name resolution
configuration page shown in Figure 27-3 . Click Add to enter the page shown in Figure 27-4 .