H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 85)

10-2
Figure 10-1 Software upgrade configuration page
Table 10-1 shows the detailed configuration for software upgrade.
Table 10-1 Software upgrade configuration items
Item Description
File
Specifies the path to save the local application file, where the filename must be with
an extension .bin or .app.
File Type
Specifies the type of the boot file for the next boot:
Main
Backup
If a file with the same
name already exists,
overwrite it without any
prompt
Specifies whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, the system
prompts “The file has existed.”, and you cannot upgrade the software.
Reboot after the
upgrade is finished. Specifies whether to reboot the device to make the upgraded software take effect
after the application file is uploaded.
Reboot
Before rebooting the device, save the configuration; otherwise, all unsaved configurations will be lost
after device reboot. After the device reboots, you need to re-log in to the Web interface.
Select Device > Device Maintenance from the navigation tree, and then click Device Reboot to enter
the page as shown in Figure 10-2 . Click Apply to reboot the device.