H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 250)

30-4
Table 30-2 Configuration items of configuring an AP
Item Description
AP Name Displays the name of the AP selected.
Radio Number
Number of the radios supported by the AP, which takes the value 1 or 2. The value
depends on the AP model.
Radio Type The value depends on the AP model and radio type.
Serial ID
Set a serial ID for the AP.
Auto: If selected, the AP serial ID is automatically found. This option is used together
with the auto AP function. For how to configure auto AP, refer to
Configuring Auto AP .
Manual: You need to type an AP serial ID.
The serial ID is the unique identity of the AP. If the AP has connected to the AC, changing
or deleting its serial ID will render the CAPWAP tunnel down and the AP needs to
discover the AC to connect again.
Description Description of the AP
Advanced setting
Select AP > AP Setup from the navigation tree, find the AP to be configured, click the corresponding
icon in the Operation column to enter the AP Setup page, and then click the Advanced Setup
expansion button to enter the page shown in Figure 30-5 .
Figure 30-5 Advanced setting
Table 30-3 shows the configuration items of advanced setting.