Displaying status information, Configuring ac backup – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 586
49-11
Displaying status information
Select Advanced > AC Backup from the navigation tree and select the Status tab to enter the page as
shown in
Figure 49-9 Status information
Table 49-3 Fast backup status
Field
Description
AP Name
Select to display the AP connecting to the AC.
Status Current
status of the current AC
Vlan ID
ID of the VLAN to which the port belongs.
Domain ID
The domain to which the AC belongs.
Link State
Link status of the AC connection:
Close: Means no connection is established.
Init: Means the connection is being set up.
Connect: Means the connection has been established.
Peer Board MAC
MAC address of the peer AC.
Peer Board State
Status of the peer AC.
Normal: Means the peer AC is normal.
Abnormal: Means the peer AC is malfunctioning.
Unknown: Means no connection is present.
Hello Interval
Heartbeat interval for an AC connection.
Configuring AC backup
Select AP > AP Setup from the navigation tree to enter the page for configuring AP. Select the target AP,
and then click the icon
in the operation column to enter the page as shown in
.