H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 303)

31-49
Click Apply.
# Enable the wireless service
Select Wireless Service > Access Service from the navigation tree to enter the page as shown in the
following figure.
Figure 31-71 Enable the wireless service
Select the dot1x option.
Click Enable.
6) Bind an AP radio to the wireless service.
Select Wireless Service > Access Service from the navigation tree, click the binding icon on the right
of wireless service dot1x to enter the page for binding an AP radio to a wireless service, as shown in
Figure 31-72 :
Figure 31-72 Bind an AP radio to a wireless service
Select the check box of the AP with the radio mode 802.11g.
Click Bind.
7) Enable 802.11g radio.
Select Radio > Radio from the navigation tree to enter the Radio page, as shown in Figure 31-73 .