H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 24)

4-1
4
Feature Matrixes
Feature Matrix for the WX5000 Series
The LS8M1WCMA0, LSWM1WCM10, and LSWM1WCM20 on the WX5000 series adopt the OAP
architecture. Installed on the expansion slots of switches, they work as OAP cards to exchange data,
status and control information with the switches through their internal service interfaces. Do not
configure services such as QoS, rate limiting and 802.1X authentication on GE interfaces on the
LS8M1WCMA0, XGE 1/0/1 on the LSWM1WCM10, and the logical interface BAGG1 aggregated by
GE1/0/1 and GE1/0/2 on the LSWM1WCM20.
Table 4-1 Feature matrix for the WX5000 series
Module Feature WX5002 WX5002V2
LS8M1WC
MA0
WX5004
LSWM1W
CM10
LSWM1W
CM20
Summary Summary
IPv6
supported IPv6
supported IPv6
supported IPv6
supported IPv6
supported IPv6
supported
License
The
WX5002
supports
32
concurrent
APs by
default,
and can be
extended
to support
64
concurrent
APs. The
WX5002V2
supports
32
concurrent
APs by
default,
and can be
extended
to support
64
concurrent
APs.
Not
supported
The
WX5004
supports
64
concurrent
APs by
default,
and can be
extended
to support
256
concurrent
APs.
The
LSWM1W
CM10
supports
64
concurrent
APs by
default,
and can be
extended
to support
256
concurrent
APs. The
LSWM1W
CM20
supports
32
concurrent
APs by
default,
and can be
extended
to support
128
concurrent
APs.
File
managem
ent
Flash
supported CF
supported Flash
supported CF
supported CF
supported Flash
supported
Device
Interface
managem
ent
Configurati
on of IPv6
address for
an
interface is
supported. Configurati
on of IPv6
address for
an
interface is
supported. Configurati
on of IPv6
address for
an
interface is
supported. Configurati
on of IPv6
address for
an
interface is
supported. Configurati
on of IPv6
address for
an
interface is
supported. Configurati
on of IPv6
address for
an
interface is
supported.