H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 206)

26-11
Item Description
WINS Server Address
Type the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any WINS server
address.
Up to eight WINS servers can be specified in a DHCP address pool, separated by
commas.
NetBIOS Node Type Select the NetBIOS node type for the client.
Return to DHCP Server Configuration Task List .
Creating a Dynamic Address Pool for the DHCP Server
Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown in
Figure 26-7 . Click on the Dynamic radio button in the Address Pool field to view all dynamic address
pools. Click Add to enter the page shown in Figure 26-9 .
Figure 26-9 Create a dynamic address pool
Table 26-2 describes dynamic address pool configuration items.
Table 26-2 Dynamic address pool configuration items
Item Description
IP Pool Name Type the name of a dynamic address pool.
IP Address
Mask
Type an IP address segment for dynamic allocation.
To avoid address conflicts, the DHCP server excludes the IP addresses
used by gateways or FTP servers from dynamic allocation.