Specifying video camera image type, Specifying video probe animation rate, Specifying maximum field of view for worm probe – HEIDENHAIN IK 5494-2D User Manual
Page 368
![background image](/files/816900/content/doc368.png)
346
QC5200 Series User’s Guide
Specifying video camera image type
Check the Image type radio button that corresponds to the output for-
mat of your video camera system.
Specifying video probe animation rate
Video probes are animated to indicate video scan direction and to enhance vis-
ibility. The animation shows dashed lines moving along the probe path in the
direction of the scan.
Animation intervals are entered to increase or decrease the animation rate. Small
intervals result in high rates and smooth animations, but commit more computer
resources. Large intervals result in lower rates and animation hesitation, but
commit fewer resources.
Enter the desired animation interval into the Animate VED... field in millisec-
onds.
Specifying maximum field of view for worm probe
The worm probe scans along an edge until the scanning process is complete, or the scanning is terminated
by an error or by an enabled scan-limit boundary. The scan-limit boundary is shown in red when enabled,
and in green when disabled.
Dashed lines move in
the direction of the scan
Scan-limit boundary stops the scan
Scan is allowed to continue beyonf the field of view