Yaskawa Yasnac PC NC User Manual
Page 117
YASNAC PC NC Operating Manual
Chapter 3: HMI Process Operation
3 - 65
Procedure to reset the Machinist password:
•
Go to the Utilities:Login screen and log in as Manager.
•
Change the user level down to Machinist.
•
Press the Change Password button.
•
Enter the Manager password in the Current Password dialog.
•
Enter the new Machinist password twice.
•
Press the Change button.
Enabling parameter writing:
•
Go to the Utilities: Login screen and make sure that the Enable Parameter Changes switch is
not checked. This will prevent any parameter above pm1000 from being changed.
•
Log in as Machinist.
•
Change to the Utilities: Maintenance: Parameter Search screen.
•
Turn off the Search switch so that drop-down menus are displayed at the top of the screen.
•
Set the first drop-down menu to “Tooling.” The parameter “Simplified TLM” should be dis-
abled.
•
Go to the Utilities: Login screen.
•
Press the parameter writing enable check box.
•
Go back to the Utilites: Maintenance:Parameter Search screen. “Simplified TLM” should be
enabled, and can now be edited.