Yaskawa Yasnac PC NC User Manual
Page 135
YASNAC PC NC Operating Manual
Chapter 3: HMI Process Operation
3 - 83
Fig. 3.7.13.2
The Parameter Search Screen with Text Search
Parameter number and description are non-editable parts of the table. However, the values dis-
played on the right side of the screen may or may not be editable, depending upon user level and
if the Enable Parameter Changes switch on the Utilities: Login screen is checked. The Param-
eter Input Units box controls whether the displayed values are in English or Metric units.
Occasionally, a parameter may have additional information attached to it. When this occurs, a
note icon
appears to the left of the parameter. Clicking on the parameter label displays the
additional information in the box at the bottom right corner of the screen.
The arrows to the right of the table are used to scroll up
and down
through the table.
In addition, if more than one page of parameters exists, the currently shown page can be set by
clicking the corresponding page number button shown between the scrolling arrows.