Yaskawa Yasnac PC NC - Manual (Page 134)

YASNAC PC NC Operating Manual Chapter 3: HMI Process Operation
3 - 82
3.7.13 Parameter Search Screen
Fig. 3.7.13.1 The Parameter Search Screen with Drop-down Menus
The Maintenance: Parameters Search screen is used for viewing and editing CNC parame-
ters.When the Search switch is not checked, the drop-down menus along the top of the screen are
used to specify which parameters are to be viewed. As drop-down menus are set, new ones appear
to the right while the display becomes more specific and shows less parameters. An example of
this type of Parameters screen is shown in Figure 3.7.13.1 on page 82.
When the Search switch is checked, either the Address or Label can be used to limit the group of
parameters shown. Figure 3.7.13.2 on page 83 is an example of this type of Parameters screen.
The Address option is used to specify the first parameter in the range of parameters (from the
starting address to the starting address plus ten) to be shown. For example, if 1100 is entered, all
existing parameters from 1100 to 1110 would appear.To use this, type a value into the text field
and hit the Enter key.
Similarly, all parameters with labels containing a certain string may be displayed via the Label
option.