9 machine setup screen, Machine setup screen -79 – Yaskawa Yasnac PC NC User Manual
Page 129
Advertising
YASNAC PC NC Operating Manual
Chapter 3: HMI Process Operation
3 - 77
3.7.9
Machine Setup Screen
Fig. 3.7.9.1
The Machine Setup Screen
The NC Parameters: Machine Setup sub-screen, Figure 3.7.9.1 on page 77, also provides jumping
points to several screens where specific parameters with addresses above 1000 may be viewed
and modified. The operation of each of these screens is identical; only the parameters which are
shown on each will vary. The G Code Setting Parameters screen, displayed in Figure 3.7.7.2 on
page 74, is representative of the appearance and behavior of these screens. In addition, there are
two other screens, discussed next, that can be reached from NC Parameters: Machine Setup.
Advertising