Yaskawa Yasnac PC NC - Manual (Page 219)

YASNAC PC NC Operating Manual Appendix 2: Alarm Tables
A2 - 15
alarm.3262 INTEX-MOTION synchronization error has occurred.
alarm.3263 MOTION-PLC synchronization error has occurred.
alarm.3264 MOTION-AXIS synchronization error has occurred.
alarm.3265 ACGC synchronization error has occurred.
alarm.3266 DNC synchronization error has occurred.
alarm.3270 Data error has occurred when turning the power OFF (battery backed-up memory).
alarm.3271 Data error has occurred when turning the power OFF (tool life control).
alarm.3272 Data error has occurred when turning the power OFF (macro).
alarm.3273 Data error has occurred when turning the power OFF (internal memory).
alarm.3274 Program has been destroyed due to turning the power off during editing (program).
alarm.3275 Data error has occurred when turning the power OFF during editing (custom variables).
alarm.3276
The power has been turned OFF during editing. This requires the program to be checked after turning the
power ON.
alarm.3281 YENET1200 command time-out error has occurred (1st-axis).
alarm.3282 YENET1200 command time-out error has occurred (2nd-axis).
alarm.3283 YENET1200 command time-out error has occurred (3rd-axis).
alarm.3284 YENETI200 command time-out error has occurred (4th-axis).
alarm.3285 YENET1200 command time-out error has occurred (5th-axis).
alarm.3291 YENET1200 command time-out error has occurred (spindle).
alarm.3296 During sequence editing, the power is turned ON for the NC with the system number switch set in "0".
alarm.3297 Sequence data has been destroyed.
alarm.3299 Communication error has occurred in the YENET1200 (I/O).
alarm.3301 Excessively large current is supplied to the servo pack main circuit (1st-axis).
alarm.3302 Excessively large current is supplied to the servo pack main circuit (2nd-axis).
alarm.3303 Excessively large current is supplied to the servo pack main circuit (3rd-axis).
alarm.3304 Excessively large current is supplied to the servo pack main circuit (4th-axis).
alarm.3305 Excessively large current is supplied to the servo pack main circuit (5th-axis).
alarm.3311 Servo pack MCCB has been tripped (X-axis).
alarm.3312 Servo pack MCCB has been tripped (Y-axis).
alarm.3313 Servo pack MCCB has been tripped (Z-axis).
alarm.3314 Servo pack MCCB has been tripped (4th-axis).
alarm.3315 Servo pack MCCB has been tripped (5th-axis).
alarm.3321 An error has occurred with the servo pack regeneration resistor (X-axis).
Alarm No. Description