Yaskawa Yasnac PC NC - Manual (Page 137)

YASNAC PC NC Operating Manual Chapter 3: HMI Process Operation
3 - 85
• Go back to the Utilities: Maintenance: High Speed Cutting screen. The grid cell with the row
labeled Default and the column labeled Acceleration & Deceleration (m/s
2
) again reads
"0.123.”
3.7.15 User Install Screen
Fig. 3.7.15.1 The User Install Screen Using Drop Down Menus
The User Install screen, shown in Figure 3.7.15.1 on page 85, is used by shop personnel to install
CNC software options. These options are divided into groups by functionality, and when the
Search switch is not checked, groups are shown in the drop down menu in the upper left corner.
When the Search switch is checked, it is possible to show only the options whose descriptions
contain a specified string. An example of this is shown in Figure 3.7.15.2 on page 86, where only
options whose descriptions contain the search string “coord” are shown. To use this feature, type
a string into the text field and hit the Enter key. Searching by Address is not enabled for this
screen.