Yaskawa Yasnac PC NC - Manual (Page 60)

YASNAC PC NC Operating Manual Chapter 3: HMI Process Operation
3 - 8
3.1.3 NC Execution Status
The execution status area (otherwise known as “Running status 1”) can have several values, as
indicated by Table on page 8 .
Table 3.1.3.1 Possible Execution Status Values
3.1.4 Motion Status
The motion status area displays information only when a program is running. Possible values are
shown in Table 3.1.4.1 on page 8.
Table 3.1.4.1 Possible Motion Status Values
Text Label Meaning
STP The NC is not executing
BUFn The NC is in the n-block buffering status.
RST NC is in reset status (Panel reset, Program reset, External reset)
PCHSC PC High speed cutting mode
GHSC GHSC form compensation mode
COR G107 corner feed rate override mode
FH Feed hold status
PRS Program return search status
blank Idle (none of above)
Text Label Meaning
M M code executing
S S code executing
T T code executing
F Feed moving
RT Rapid moving
B B code executing
DWELL Dwell executing
MAN-F Manual interpolation
SAGR Spindle speed agree signal waiting
CWAIT C pulse waiting
blank Idle