Yaskawa Yasnac PC NC User Manual
Page 67
YASNAC PC NC Operating Manual
Chapter 3: HMI Process Operation
3 - 15
Incrementing a number:
•
Select the number field that contains the number to be incremented.
•
Display the calculator by pressing the Calc button
.
•
Pressing the + key, and then enter the increment amount.
•
Press the =/P/C key. This will compute the result, put the result in the number field and close
the calculator.
Raising a number to a power:
•
Display the calculator by pressing the Calc button
.
•
Press the expand button (>) to enlarge the calculator and show expanded functionality.
•
Enter “2.” using the calculator’s keypad. “2.” is now shown in the display.
•
Press the y^x button. A “^” appears in the lower left corner.
•
Enter "3." using the calculator’s keypad. “3.” is now shown in the display. In the upper left
corner there is a small “2.”, and in the lower left corner there is a “^”.
•
Press the “=” button. “8.” is now shown in the display.
Using the Get key:
•
Change to the Setup: Workshift screen and select a cell in the grid. The border of the selected
cell becomes a black line. Type in “7.” and hit the Enter key. Touch outside the grid to dese-
lect the cell.
•
Display the calculator by pressing the Calc button
.
•
Enter “2.” using the calculator’s keypad. “2.” is now shown in the display.
•
Press the + button. A “+” appears in the lower left corner of the display.
•
Enter “3.” using the calculator’s keypad. “3.” is now shown in the display. In the upper left
corner there is a small “2.”, and in the lower left corner there is a “+”.
•
Select the grid cell with the value of “7.000” from the Setup: Workshift screen. The border of
the selected cell becomes a black line.
•
Press the Get button on the calculator. A “7.” appears in the display of the calculator. A small
“2.” is still in the upper left corner, and a “+” appears in the lower left corner.
•
Press the = button. “9.” appears in the calculator’s display, and the left corners are cleared.
The “3.” that was entered earlier was discarded.
Using the Put key:
•
Display the calculator by pressing the Calc button
.
•
Enter “4.” using the calculator’s keypad. “4.” is now shown in the display.
•
Press the + key on the calculator’s keypad. A “+” appears in the lower left corner of the dis-
play.