3Com WXR100 3CRWXR10095A - Manual (Page 106)

106 C HAPTER 3: S YSTEM S ERVICE C OMMANDS
History — Introduced in MSS Version 3.0.
Usage — Use this command if the output of a CLI command is greater
than the number of lines allowed by default for a terminal type.
Examples — To set the number of lines displayed to 100, type the
following command:
WX4400# set length 100
success: screen length for this session set to 100
set license Installs an upgrade license, for managing more MAPs.
Syntax — set license license-key activation-key
„ license-key — License key, starting with WXL. You can enter the key
with or without the hyphens.
„ activation-key
— Activation key, starting with WXA. You can enter
the key with or without the hyphens.
Defaults — The WX4400 can boot and manage 24 MAPs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The license key is shipped with the switch. To obtain the
activation key, access the 3Com web site. Each license and activation key
pair allows the switch to actively manage an additional 24 MAPs. You can
install up to three upgrade license and activation key pairs, to actively
manage up to 96 MAPs.
Examples — To install an upgrade license and activation key, type the
following command:
WX4400# set license WXL-076E-93E9-62DA-54D8
WXA-3E04-4CC2-430D-B508
Serial Number : M8XE4IBB8DB10
License Number : 245
License Key : WXL-076E-93E9-62DA-54D8
Activation key : WXA-3E04-4CC2-430D-B508
Feature : 24 additional ports
Expires : Never