3Com WXR100 3CRWXR10095A - Manual (Page 595)

display security acl resource-usage 595
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the port to which security
ACL acl_111 is mapped:
WX4400# display security acl map acl_111
ACL acl_111 is mapped to:
Port 4 in
See Also
„
clear security acl map on page 587
„
display security acl map on page 594
„
set security acl map on page 605
display security acl
resource-usage Displays statistics about the resources used by security ACL filtering on
the WX switch.
Syntax — display security acl resource-usage
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Use this command with the help of 3Com to diagnose an ACL
resource problem. (To obtain 3Com Technical Support, see “Obtaining
Support for Your 3Com Products” on page 787.)