Clear fdb – 3Com WXR100 3CRWXR10095A User Manual
Page 152
152
C
HAPTER
5: VLAN C
OMMANDS
clear fdb
Deletes an entry from the forwarding database (FDB).
Syntax —
clear fdb {perm | static | dynamic |
port
port-list} [vlan vlan-id] [tag tag-value]
perm
— Clears permanent entries. A permanent entry does not age
out and remains in the database even after a reboot, reset, or power
cycle. You must specify a VLAN name or number with this option.
static
— Clears static entries. A static entry does not age out, but is
removed from the database after a reboot, reset, or power cycle. You
must specify a VLAN name or number with this option.
dynamic
— Clears dynamic entries. A dynamic entry is automatically
removed through aging or after a reboot, reset, or power cycle. You
are not required to specify a VLAN name or number with this option.
port
port-list
— Clears dynamic entries that match destination
ports in the port list. You are not required to specify a VLAN name or
number with this option.
vlan
vlan-id
— VLAN name or number—required for removing
permanent and static entries. For dynamic entries, specifying a VLAN
removes entries that match only that VLAN. Otherwise, dynamic
entries that match all VLANs are removed.
tag
tag-value
— VLAN tag value that identifies a virtual port. If you
do not specify a tag value, MSS deletes only entries that match
untagged interfaces. Specifying a tag value deletes entries that match
only the specified tagged interfaces
Defaults — None.
Access — Enabled.
display fdb agingtime on page 159
VLAN Profiles for
MAP local Switching
clear vlan-profile on page 156
clear vlan-profile on page 156
display vlan-profile on page 168
Table 20 VLAN Commands by Usage (continued)
Type
Command