Display fdb count – 3Com WXR100 3CRWXR10095A User Manual
Page 160
160
C
HAPTER
5: VLAN C
OMMANDS
VLAN 2 aging time = 600 sec
VLAN 1 aging time = 300 sec
Because the forwarding database aging timeout period can be
configured only on an individual VLAN basis, the command lists the aging
timeout period for each VLAN separately.
See Also
display fdb count
Lists the number of entries in the forwarding database.
Syntax —
display fdb count
{perm | static | dynamic}
[vlan vlan-id]
perm
— Lists the number of permanent entries. A permanent entry
does not age out and remains in the database even after a reboot,
reset, or power cycle.
static
— Lists the number of static entries. A static entry does not
age out, but is removed from the database after a reboot, reset, or
power cycle.
dynamic
— Lists the number of dynamic entries. A dynamic entry is
automatically removed through aging or after a reboot, reset, or
power cycle.
vlan
vlan-id
— VLAN name or number. Entries are listed for only the
specified VLAN.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
The following command lists the number of dynamic entries that the
forwarding database contains:
WX1200# display fdb count dynamic
Total Matching Entries = 2
See Also