3Com WXR100 3CRWXR10095A - Manual (Page 190)

190 C HAPTER 7: IP S ERVICES C OMMANDS
Examples — The following command removes NTP server
192.168.40.240 from a WX switch configuration:
WX4400# clear ntp server 192.168.40.240
success: change accepted.
See Also
„
clear ntp update-interval on page 190
„
display ntp on page 207
„
set ntp on page 231
„
set ntp server on page 232
„
set ntp update-interval on page 233
clear ntp
update-interval Resets the NTP update interval to the default value.
Syntax — clear ntp update-interval
Defaults — The default NTP update interval is 64 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the NTP interval to the default value, type the
following command:
WX4400# clear ntp update-interval
success: change accepted.
See Also
„
clear ntp server on page 189
„
display ntp on page 207
„
set ntp on page 231
„
set ntp server on page 232
„
set ntp update-interval on page 233