3Com WXR100 3CRWXR10095A - Manual (Page 598)

598 C HAPTER 14: S ECURITY ACL C OMMANDS
LUdef in use Number of the lookup definition (LUdef) table currently in
use for packet handling.
Default action
pointer Memory address used for packet handling, from which
default action data is obtained when necessary.
L4 global Security ACL mapping on the WX switch:
„
True — Security ACLs are mapped.
„ False — No security ACLs are mapped.
No rules Security ACE rule mapping on the WX switch:
„
True — No security ACEs are mapped.
„ False — Security ACEs are mapped.
Non-IP rules Non-IP security ACE mapping on the WX switch:
„
True — Non-IP security ACEs are mapped.
„
False — Only IP security ACEs are mapped.
Note: The current MSS version supports security ACEs for IP
only.
Root in first Leaf buffer allocation:
„ True — Enough primary leaf buffers are allocated in
nonvolatile memory to accommodate all leaves.
„
False — Insufficient primary leaf buffers are allocated in
nonvolatile memory to accommodate all leaves.
Static default action Definition of a default action:
„
True — A default action types is defined.
„
False — No default action type is defined.
No per-user (MAC)
mapping Per-user application of a security ACL with the Filter-Id
attribute, on the WX switch:
„ True — No security ACLs are applied to users.
„
False — Security ACLs are applied to users.
Out mapping Application of security ACLs to outgoing traffic on the WX
switch:
„
True — Security ACLs are mapped to outgoing traffic.
„ False — No security ACLs are mapped to outgoing
traffic.
Table 88 Output of display security acl resource-usage (continued)
Field Description