3Com WXR100 3CRWXR10095A - Manual (Page 426)

426 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
set ap force-image-
download Configures a MAP to download a software image from the WX instead of
loading the image locally stored on the MAP.
Syntax — set ap auto force-image-download {enable | disable}
„ ap auto
—Configures forced image download for the MAP
configuration profile.
„ force-image-download enable
—Enables forced image download.
„ force-image-download disable
—Disables forced image download.
Defaults — Forced image download is disabled by default.
Access — Enabled.
History —Version 5.0Command introduced. Version 6.0Option dap
removed.
Usage — A change to the forced image download option takes place the
next time the MAP is restarted.
Even when forced image download is disabled (the default), the MAP still
checks with the WX to verify that the MAP has the latest image, and to
verify that the WX is running MSS Version 5.0 or later.
The MAP loads a local image only if the WX is running MSS Version 5.0 or
later and does not have a different MAP image than the one in the MAP
local storage. If the WX is not running MSS Version 5.0 or later, or the
WX has a different version of the MAP image than the current version on
the MAP, the MAP loads an image from the WX.
Examples — The following command enables forced image download
on Distributed MAP 69:
WX1200# set ap 69 force-image-download enable
success: change accepted.
See Also
„
display ap config on page 364