3Com WXR100 3CRWXR10095A - Manual (Page 158)

158 C HAPTER 5: VLAN C OMMANDS
„ dynamic — Displays dynamic entries. A dynamic entry is automatically
removed through aging or after a reboot, reset, or power cycle.
„ system — Displays system entries. A system entry is added by MSS.
For example, the authentication protocols can add entries for wired
and wireless authentication users.
„ all — Displays all entries in the database, or all the entries that match
a particular port or ports or a particular VLAN.
„
port port-list — Destination port(s) for which to display entries.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Usage — To display the entire forwarding database, enter the display fdb
command without options. To display only a portion of the database, use
optional parameters to specify the types of entries you want to display.
Examples — The following command displays all entries in the
forwarding database:
WX4400# display fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports [Protocol Type]
---- ---- ------------------ ----- -----------------------------------------
1 00:01:97:13:0b:1f 1 [ALL]
1 aa:bb:cc:dd:ee:ff * 3 [ALL]
1 00:0b:0e:02:76:f5 1 [ALL]
Total Matching FDB Entries Displayed = 3
The top line of the display identifies the characters to distinguish among
the entry types.
The following command displays all entries that begin with the MAC
address glob 00:
WX4400# display fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports [Protocol Type]
---- ---- ------------------ ----- -----------------------------------------
1 00:01:97:13:0b:1f 1 [ALL]
1 00:0b:0e:02:76:f5 1 [ALL]
Total Matching FDB Entries Displayed = 2