3Com WXR100 3CRWXR10095A - Manual (Page 621)

display crypto ca-certificate 621
Examples — The following commands copy a PKCS #12 object file for
an EAP certificate and key pair—and optionally the certificate authority’s
own certificate—from a TFTP server to nonvolatile storage on the WX
switch, create the one-time password hap9iN#ss, and unpack the
PKCS #12 file:
WX4400# copy tftp://192.168.253.1/2048full.p12 2048full.p12
success: received 637 bytes in 0.253 seconds [ 2517
bytes/sec]
WX4400# crypto otp eap hap9iN#ss
OTP set
WX4400# crypto pkcs12 eap 2048full.p12
Unwrapped from PKCS12 file:
keypair
device certificate
CA certificate
See Also
„
crypto otp on page 618
display crypto
ca-certificate Displays information about the certificate authority’s PEM-encoded
PKCS #7 certificate.
Syntax —
display crypto ca-certificate
{
admin
|
eap
|
web
}
„ admin
— Displays information about the certificate authority’s
certificate that signed the administrative certificate for the WX switch.
The administrative certificate authenticates the WX to 3WXM or Web
View.
„ eap — Displays information about the certificate authority’s certificate
that signed the Extensible Authentication Protocol (EAP) certificate for
the WX switch.
The EAP certificate authenticates the WX switch to 802.1X supplicants
(clients).
„ web — Displays information about the certificate authority’s certificate
that signed the WebAAA certificate for the WX switch.
The WebAAA certificate authenticates the WX switch to WebAAA
clients.
Defaults — None.