3Com WXR100 3CRWXR10095A - Manual (Page 236)

236 C HAPTER 7: IP S ERVICES C OMMANDS
„
APTimeoutTraps—Generated when a MAP access point fails to
respond to the WX switch.
„
AuthenTraps—Generated when the WX switch’s SNMP engine
receives a bad community string.
„
AutoTuneRadioChannelChangeTraps—Generated when the
RF Auto-Tuning feature changes the channel on a radio.
„
AutoTuneRadioPowerChangeTraps—Generated when the
RF Auto-Tuning feature changes the power setting on a radio.
„
ClientAssociationFailureTraps—Generated when a client’s
attempt to associate with a radio fails.
„
ClientAssociationSuccessTraps—Generated when a client is
successfully associated.
„
ClientAuthorizationSuccessTraps—Generated when a client is
successfully authorized.
„
ClientAuthenticationFailureTraps—Generated when
authentication fails for a client.
„
ClientAuthenticationSuccessTraps—Generated when a client is
successfully authenticated.
„
ClientAuthorizationFailureTraps—Generated when
authorization fails for a client.
„
ClientClearedTraps—Generated when a client’s session is cleared.
„
ClientDeAssociationTraps—Generated when a client is
dissociated from a radio.
„
ClientDeAuthenticationTraps—Generated when a client is
disauthenticated from a radio.
„
ClientDot1xFailureTraps—Generated when a client experiences
an 802.1X failure.
„
ClientIpAddressChangeTraps—Generated when a client’s IP
address changes.
„
ClientRoamingTraps—Generated when a client roams.
„
CounterMeasureStartTraps—Generated when MSS begins
countermeasures against a rogue access point.
„
CounterMeasureStopTraps—Generated when MSS stops
countermeasures against a rogue access point.