3Com WXR100 3CRWXR10095A - Manual (Page 200)

200 C HAPTER 7: IP S ERVICES C OMMANDS
See Also
„
set interface dhcp-server on page 220
display interface Displays the IP interfaces configured on the WX.
Syntax — display interface [vlan-id]
„ vlan-id
— VLAN name or number.
Defaults — If you do not specify a VLAN ID, interfaces for all VLANs are
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays all the IP interfaces
configured on a WX switch:
WX4400# display interface
VLAN Name Address Mask Enabled State RIB
---- --------------- --------------- --------------- ------- ----- -------
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4
4094 web-aaa 10.10.10.1 255.255.255.0 YES Up ipv4
Table 34 describes the fields in this display.
IP Address IP address leased to the client.
Subnet Mask Network mask of the IP address leased to the client.
Default Gateway Default gateway IP address included in the DHCP Offer to the client.
DNS Server DNS server IP address(es) included in the DHCP Offer to the client.
DNS Domain
Name Default DNS domain name included in the DHCP Offer to the
client.
Table 33 Output for display dhcp-server verbose
Field Description