3Com WXR100 3CRWXR10095A - Manual (Page 647)

clear dot1x tx-period 647
clear dot1x
tx-period Resets to the default setting the number of seconds that must elapse
before the WX switch retransmits an EAP over LAN (EAPoL) packet.
Syntax — clear dot1x tx-period
Defaults — The default is 5 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the EAPoL
retransmission time:
WX4400# clear dot1x tx-period
success: change accepted.
See Also
„
display dot1x on page 647
„
set dot1x tx-period on page 658
display dot1x Displays 802.1X client information for statistics and configuration
settings.
Syntax — display dot1x {clients | stats | config}
„ clients — Displays information about active 802.1X clients,
including client name, MAC address, and state.
„ stats — Displays global 802.1X statistics associated with connecting
and authenticating.
„ config
— Displays a summary of the current configuration.
Defaults — None.
Access — Enabled.