3Com WXR100 3CRWXR10095A - Manual (Page 497)

set service-profile long-retry-count 497
set service-profile
long-retry-count Changes the long retry threshold for a service profile. The long retry
threshold specifies the number of times a radio can send a long unicast
frame without receiving an acknowledgment. A long unicast frame is a
frame that is equal to or longer than the frag-threshold.
Syntax — set service-profile name long-retry-count threshold
„ name — Service profile name.
„ threshold
— Number of times the radio can send the same long
unicast frame. You can enter a value from 1 through 15.
Defaults — The default long unicast retry threshold is 5 attempts.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Examples — The following command changes the long retry threshold
for service profile sp1 to 8:
WX4400# set service-profile sp1 long-retry-count 8
success: change accepted.
See Also
„
set radio-profile frag-threshold on page 461
„
set service-profile short-retry-count on page 504
„
display service-profile on page 401