3Com WXR100 3CRWXR10095A - Manual (Page 223)

set ip dns 223
set ip dns Enables or disables DNS on a wireless LAN switch.
Syntax —
set ip dns {enable | disable}
„ enable
— Enables DNS.
„ disable — Disables DNS.
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client
See Also
„
clear ip dns domain on page 187
„
clear ip dns server on page 187
„
display ip dns on page 202
„
set ip dns domain on page 223
„
set ip dns server on page 224
set ip dns domain Configures a default domain name for DNS queries. The WX appends the
default domain name to domain names or hostnames you enter in
commands.
Syntax —
set ip dns domain name
„ name
— Domain name of between 1 and 64 alphanumeric characters
with no spaces (for example, example.org).
Defaults — None.
Access — Enabled.
Usage — To override the default domain name when entering a
hostname in a CLI command, enter a period at the end of the hostname.
For example, if the default domain name is example.com, enter
chris. if
the fully qualified hostname is chris and not chris.example.com.