3Com WXR100 3CRWXR10095A User Manual
Page 96
96
C
HAPTER
3: S
YSTEM
S
ERVICE
C
OMMANDS
Examples — To show system information, type the following command:
WX4400# display system
===============================================================================
Product Name: WX4400
System Name: WX-bldg3
System Countrycode: US
System Location: first-floor-bldg3
System Contact:
System IP: 192.168.12.7
System idle timeout: 3600
System MAC: 00:0B:0E:00:04:30
===============================================================================
Boot Time: 2003-11-07 15:45:49
Uptime: 13 days 04:29:10
===============================================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 97.04/744.03 (13%)
Total Power Over Ethernet : 29.000
===============================================================================
Table 8 describes the fields of display system output.
Table 8 display system output
Field
Description
Product Name
Switch model number.
System Name
System name (factory default, or optionally configured
with set system name).
System Countrycode
Country-specific 802.11 code required for MAP operation
(configured with set system countrycode).
System Location
Record of the WX switch’s physical location (optionally
configured with set system location).
System Contact
Contact information about the system administrator or
another person to contact about the system (optionally
configured with set system contact).
System IP
Common interface, source, and default IP address for the
device, in dotted decimal notation (configured with set
system ip-address).