3Com WXR100 3CRWXR10095A - Manual (Page 344)

344 C HAPTER 10: N ETWORK D OMAIN C OMMANDS
display
network-domain Displays the status of Network Domain seeds and members.
Syntax —
display network-domain
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Examples — To display Network Domain status, type the following
command. The output of the command differs based on whether the WX
switch is a member of a Network Domain or a Network Domain seed.
On a WX that is a Network Domain member, the following output is
displayed:
WX1200# display network-domain
Member Network Domain name: California
Member State Mode
------------------- ------
10.8.107.1 UP SEED
On a WX switch that is a Network Domain seed, information is displayed
about the Network Domains of which the WX switch is a member, as well
as Network Domain seeds with which the WX switch has a peer
relationship. For example:
WX1200# display network-domain
Network Domain name: California
Peer State
--------------- -------------
10.8.107.1 UP
Member State Mode
--------------- ------------- ------
10.1.0.0 DOWN SEED
Member Network Domain name:
Member State Mode
--------------- ----------- ------
10.8.107.1 UP MEMBER
10.1.0.0 DOWN SEED