3Com WXR100 3CRWXR10095A - Manual (Page 126)

126 C HAPTER 4: P ORT C OMMANDS
See Also
„
display port mirror on page 125
„
set port mirror on page 140
display port poe Displays status information for ports on which Power over Ethernet (PoE)
is enabled.
Syntax — display port poe [port-list]
„ port-list — List of physical ports. If you do not specify a port list,
PoE information is displayed for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays PoE information for all
ports on a WX1200 switch:
WX1200# display port poe
Link Port PoE PoE
Port Name Status Type config Draw
============================================================
1 1 up - disabled off
2 2 down - disabled off
3 3 down - disabled off
4 4 down MAP enabled 1.44
5 5 down - disabled off
6 6 down - disabled off
Table 13 describes the fields in this display.
Table 13 Output for display port poe
Field Description
Port Port number.
Name Port name. If the port does not have a name, the
port number is listed.