3Com WXR100 3CRWXR10095A - Manual (Page 754)

754 C HAPTER 22: S NOOP C OMMANDS
display snoop Displays the MAP radio mapping for all snoop filters.
Syntax —
display snoop
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — To display the mappings for a specific MAP radio, use the
display snoop map command.
Examples — The following command shows the MAP radio mappings
for all snoop filters configured on a WX switch:
WX1200# display snoop
ap: 3 Radio: 2
snoop1
snoop2
ap: 2 Radio: 2
snoop2
See Also
„
clear snoop map on page 748
„
display snoop map on page 755
„
set snoop map on page 752
display snoop info Shows the configured snoop filters.
Syntax —
display snoop filter-name
„ filter-name
— Name of the snoop filter.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.