Set interface – 3Com WXR100 3CRWXR10095A User Manual

Page 218

Advertising
background image

218

C

HAPTER

7: IP S

ERVICES

C

OMMANDS

set interface

Configures an IP interface on a VLAN.

Syntax

set interface vlan-id ip

{ip-addr mask | ip-addr/mask-length}

„

vlan-id

— VLAN name or number.

„

ip-addr mask

IP address and subnet mask in dotted decimal

notation (for example, 10.10.10.10 255.255.255.0).

„

ip-addr/mask-length

IP address and subnet mask length in CIDR

format (for example, 10.10.10.10/24).

Defaults — None.

Access — Enabled.

History— Introduced in MSS Version 3.0.

Usage — You can assign one IP interface to each VLAN.

If an interface is already configured on the specified VLAN, this command
replaces the interface. If you replace an interface in use as the system IP
address, replacing the interface can interfere with system tasks that use
the system IP address, including the following:

„

Mobility domain operations

„

Topology reporting for dual-homed MAP access points

„

Default source IP address used in unsolicited communications such as
AAA accounting reports and SNMP traps

Examples — The following command configures IP interface
10.10.10.10/24 on VLAN default:

WX1200# set interface default ip 10.10.10.10/24

success: set ip address 10.10.10.10 netmask 255.255.255.0 on vlan default

The following command configures IP interface 10.10.20.10
255.255.255.0 on VLAN mauve:

WX1200# set interface mauve ip 10.10.20.10 255.255.255.0

success: set ip address 10.10.20.10 netmask 255.255.255.0 on vlan mauve

Advertising
This manual is related to the following products: