3Com WXR100 3CRWXR10095A - Manual (Page 181)

display qos 181
display qos Displays the switch’s QoS settings.
Syntax —
display qos [default]
„ default — Displays the default mappings.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.1.
Examples — The following command displays the default QoS settings:
WX1200# display qos default
Ingress QoS Classification Map (dscp-to-cos)
Ingress DSCP CoS Level
============================================================
00-09 0 0 0 0 0 0 0 0 1
1
10-19 1 1 1 1 1 1 2 2 2
2
20-29 2 2 2 2 3 3 3 3 3
3
30-39 3 3 4 4 4 4 4 4 4
4
40-49 5 5 5 5 5 5 5 5 6
6
50-59 6 6 6 6 6 6 7 7 7
7
60-63 7 7 7 7
Egress QoS Marking Map (cos-to-dscp)
CoS Level 0 1 2 3 4 5
6 7
============================================================
Egress DSCP 0 8 16 24 32 40
48 56
Egress ToS byte 0x00 0x20 0x40 0x60 0x80 0xA0
0xC0 0xE0
See Also
„
display qos dscp-table on page 182