3Com WXR100 3CRWXR10095A - Manual (Page 449)

set radio-profile auto-tune 11a-channel-range 449
„ disable — Configures radios to scan only passively for rogues by
listening for beacons and probe responses.
Defaults — Active scanning is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — You can enter this command on any WX in the Mobility
Domain. The command takes effect only on that WX.
Examples — The following command disables active scan in radio profile
radprof3:
wx4400# set radio-profile radprof3 active-scan disable
success: change accepted.
See Also
„
display radio-profile on page 398
set radio-profile
auto-tune
11a-channel-range When configured, the MAP 802.11a radio selects a channel from a
limited range of available channels or all available channels.
Syntax — set radio-profile name auto-tune 11a-channel-range
{lower-bands | all-bands}
„ name —The name of the radio profile to configure the 802.11a
channel range.
„ lower-bands —Only the lower channels are available for the 802.11a
radio: 36, 40, 44, 48, 52, 56, 60, or 64.
„ all-bands —All 802.11a channels are available for the 802.11a radio:
36. 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, and 161.
Defaults — None
Access — Enabled
History —Version 6.0Command introduced.
Usage — Improves the 802.11a radio usage on the network.