Set service-profile cipher-ccmp – 3Com WXR100 3CRWXR10095A User Manual
Page 488
488
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
set service-profile
cipher-ccmp
Enables Counter with Cipher Block Chaining Message Authentication
Code Protocol (CCMP) encryption with WPA clients, for a service profile.
Syntax —
set service-profile
name
cipher-ccmp
{enable
|
disable
}
name
— Service profile name.
enable
— Enables CCMP encryption for WPA clients.
disable
— Disables CCMP encryption for WPA clients.
Defaults — CCMP encryption is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use CCMP, you must also enable the WPA IE.
Examples — The following command configures service profile sp2 to
use CCMP encryption:
WX4400# set service-profile sp2 cipher-ccmp enable
success: change accepted.
See Also
display service-profile on page 401
set service-profile cipher-tkip on page 489
set service-profile cipher-wep104 on page 490
set service-profile cipher-wep40 on page 491