3Com WXR100 3CRWXR10095A - Manual (Page 748)

748 C HAPTER 22: S NOOP C OMMANDS
clear snoop Deletes a snoop filter.
Syntax —
clear snoop filter-name
„ filter-name — Name of the snoop filter.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command deletes snoop filter snoop1:
WX1200# clear snoop snoop1
See Also
„
set snoop on page 749
„
display snoop info on page 754
clear snoop map Removes a snoop filter from a MAP radio.
Syntax — clear snoop map filter-name ap ap-num radio {1 | 2}
„ filter-name
— Name of the snoop filter.
„ ap ap-num — Number of a MAP to which the snoop filter is mapped.
„ radio 1 — Radio 1 of the MAP.
„ radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.