3Com WXR100 3CRWXR10095A - Manual (Page 624)

624 C HAPTER 15: C RYPTOGRAPHY C OMMANDS
display crypto key
domain Displays domain key information.
Syntax —
display crypto key domain
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To display domain key information, type the following
command:
WX4400# display crypto key domain
See Also crypto generate key on page 613
display crypto key
ssh Displays SSH authentication key information. This command displays the
checksum (also called a fingerprint) of the public SSH authentication key.
When you connect to the WX switch with an SSH client, you can
compare the SSH key checksum displayed by the WX switch with the one
displayed by the client to verify that you really are connected to the WX
switch and not another device. Generally, SSH clients remember the
encryption key after the first connection, so you need to check the key
only once.
Syntax — display crypto key ssh
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To display SSH key information, type the following
command:
WX4400# display crypto key ssh
ec:6f:56:7f:d1:fd:c0:28:93:ae:a4:f9:7c:f5:13:04
See Also crypto generate key on page 613