3Com WXR100 3CRWXR10095A - Manual (Page 535)

clear spantree statistics 535
History —Introduced in MSS Version 3.0.
Usage — MSS does not change a port’s priority for VLANs other than the
one(s) you specify.
Examples — The following command resets the STP priority for port 2 in
VLAN avocado:
WX4400# clear spantree portvlanpri 2 vlan avocado
success: change accepted.
See Also
„
clear spantree portpri on page 533
„
display spantree on page 536
„
set spantree portpri on page 555
„
set spantree portvlanpri on page 557
clear spantree
statistics Clears STP statistics counters for a network port or ports and resets them
to 0.
Syntax — clear spantree statistics port-list [vlan vlan-id]
„ port-list — List of ports. Statistics counters are reset on the
specified ports.
„ vlan vlan-id — VLAN name or number. MSS resets statistics
counters for only the specified VLAN.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command clears STP statistics counters for
ports 1, 3, and 5 through 8, for all VLANs:
WX1200# clear spantree statistics 1,3,5-8
success: change accepted.
See Also
„
display spantree statistics on page 542