Set service-profile soda agent-directory – 3Com WXR100 3CRWXR10095A User Manual

Page 505

Advertising
background image

set service-profile soda agent-directory

505

„

threshold

— Number of times a radio can send the same short

unicast frame. You can enter a value from 1 through 15.

Defaults — The default short unicast retry threshold is 5 attempts.

Examples — Enabled.

History —Introduced in MSS Version 4.2.

Examples — The following command changes the short retry threshold
for service profile sp1 to 3:

WX4400# set service-profile sp1 short-retry-count 3

success: change accepted.

See Also

„

display service-profile on page 401

„

set radio-profile frag-threshold on page 461

„

set service-profile long-retry-count on page 497

set service-profile
soda
agent-directory

Specifies the directory on the WX where the SODA agent files for a
service profile are located.

Syntax

set service-profile

name soda agent-directory

directory

„

name

— Service profile name.

„

directory

— Directory on the WX for SODA agent files.

Defaults — By default, the WX expects SODA agent files to be located in
a directory with the same name as SSID.

Access — Enabled.

History —Introduced in MSS Version 4.2.

Usage — If the same SODA agent is used for multiple service profiles,
you can use this command to specify a single directory for SODA agent
files on the WX, rather than placing the same SODA agent files in a
separate directory for each service profile.

Advertising
This manual is related to the following products: