3Com WXR100 3CRWXR10095A - Manual (Page 485)

set service-profile bridging 485
„ enable — Enables beaconing of the SSID managed by the service
profile.
„ disable — Disables beaconing of the SSID managed by the service profile.
Defaults — Beaconing is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command disables beaconing of the SSID
managed by service profile sp2:
WX4400# set service-profile sp2 beacon disable
success: change accepted.
See Also
„
display service-profile on page 401
„
set radio-profile beacon-interval on page 457
„
set service-profile ssid-name on page 513
„
set service-profile ssid-type on page 514
set service-profile
bridging Enables wireless bridging for a service profile configured for WLAN mesh
services.
Syntax —
set service-profile mesh-service-profile bridging
{enable | disable}
„ mesh-service-profile — Mesh service profile name.
„ enable
— Enables wireless bridging for the service profile.
„ disable — Disables wireless bridging for the service profile.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 6.0.