3Com WXR100 3CRWXR10095A - Manual (Page 541)

display spantree portfast 541
display spantree
portfast Displays STP uplink fast convergence information for all network ports or
for one or more network ports.
Syntax — display spantree portfast [port-list]
„ port-list — List of ports. If you do not specify any ports, MSS
displays uplink fast convergence information for all ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows uplink fast convergence
information for all ports:
WX1200# display spantree portfast
Port Vlan Portfast
------------------------- ---- ----------
1 1 disable
2 1 disable
3 1 disable
4 1 enable
5 1 disable
6 1 disable
7 1 disable
8 1 disable
Table 77 describes the fields in this display.
See Also
„
set spantree portfast on page 554
Table 77 Output for display spantree portfast
Field Description
Port Port number.
VLAN VLAN number.
Portfast State of the uplink fast convergence feature:
„
Enable
„
Disable