3Com WXR100 3CRWXR10095A - Manual (Page 611)

crypto ca-certificate 611
„ PEM-formatted certificate — ASCII text representation of the
certificate authority PKCS #7 certificate, consisting of up to
5120 characters that you have obtained from the certificate authority.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Webaaa option renamed to
web in MSS Version 4.1.
Usage — The Privacy-Enhanced Mail protocol (PEM) format is used for
representing a PKCS #7 certificate in ASCII text. PEM uses base64
encoding to convert the certificate to ASCII text, then puts the encoded
text between the following delimiters:
-----BEGIN CERTIFICATE-----
-----END CERTIFICATE-----
To use this command, you must already have obtained a copy of the
certificate authority’s certificate as a PKCS #7 object file. Then do the
following:
1 Open the PKCS #7 object file with an ASCII text editor such as Notepad
or vi.
2 Enter the crypto ca-certificate command on the CLI command line.
3 When MSS prompts you for the PEM-formatted certificate, paste the
PKCS #7 object file onto the command line.
Examples — The following command adds the certificate authority’s
certificate to WX certificate and key storage:
WX4400# crypto ca-certificate admin
Enter PEM-encoded certificate
-----BEGIN CERTIFICATE-----
MIIDwDCCA2qgAwIBAgIQL2jvuu4PO5FAQCyewU3ojANBgkqhkiG9wOBAQUFADCB
mzerMClaweVQQTTooewi\wpoer0QWNFNkj90044mbdrl1277SWQ8G7DiwYUtrqoQplKJvxz
.....
Lm8wmVYxP56M;CUAm908C2foYgOY40=
-----END CERTIFICATE-----
See Also
„
display crypto ca-certificate on page 621