3Com WXR100 3CRWXR10095A - Manual (Page 423)

set ap boot-configuration vlan 423
WX1200# set ap 1 boot- configuration switch switch-ip
172.16.0.21 mode enable
success: change accepted.
The following command configures Distributed MAP 1 to use the WX
with the name wxr2 as its boot device. The DNS server at 172.16.0.1 is
used to resolve the name of the WX switch.
WX4400# set ap 1 boot-configuration switch name wxr2 dns
172.16.0.1 mode enable
success: change accepted.
See Also
„
clear ap boot-configuration on page 358
„
display ap boot-configuration on page 390
„
set ap boot- configuration ip on page 417
„
set ap boot-configuration vlan on page 423
set ap
boot-configuration
vlan Specifies 802.1Q VLAN tagging information for a Distributed MAP.
Syntax —
set ap ap-number boot-configuration vlan vlan-tag
tag-value [mode {enable | disable}]
Syntax —
set ap ap-number boot-configuration vlan mode
{enable | disable}
„ ap ap-number — Index value that indentifies the MAP on the WX.
„ vlan-tag tag-value
— The VLAN tag value. You can specify a
number from 1 – 4095.
„ mode { enable | disable } — Enables or disables use of the specified
VLAN tag on the Distributed MAP.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS 4.2. Version 6.0 removed the dap option.